German Made 350 Watt Wind Turbine
Technology
These German made wind generators define new standards for micro wind turbine technology. They
fulfill the highest professional requirements and can be operated completely unsupervised even under
extreme climatic conditions.
The aerodynamic rotor control system adjusts the pitch angle of the blades, similar to large wind
turbines, putting this little 350w turbine in a class of its own. The mechanical controller is fully
integrated into the hub and works without expensive electrical or hydraulic components.
The controller automatically limits the rotor speed even at extreme wind velocities and protects
the wind turbine from over speed. It also guarantees smooth operation under all weather conditions
keeping the power output constant as can be seen from the power curve below.
Generator
The permanent magnet brushless, synchronous, generator is especially adapted to the aerodynamic
power characteristics of the rotor. High-grade Neodymium magnets are used for optimum efficiency.
The three-phase alternating current is rectified internally.
All electrical components are properly dimensioned for high surge currents, low thermal loads and
high durability. The aluminium generator housing provides perfect heat dissipation, with stainless
steel shaft bearings being lifetime lubricated and sealed against humidity and dust by low friction
seals.
Materials
These turbines are entirely made of high grade and corrosion-proof materials. All mechanical
components are integrated into sealed housings and are effectively protected against dust, salt and
humidity. The housings and the wind vane are made of saltwater-proof aluminium alloy with additional
powder coating. All steel parts like shafts, axles, bearings, bolts and nuts are made of stainless
chromium steel. The rotorblades are made of carbon fiber reinforced plastics.
Although designed specifically for the marine environment this wind turbine is perfectly at home
in the back garden or on top of a mountain. Combined with some solar (photovoltaic) panels this can
give the user free renewable energy all year round.
| Nominal power |
350W |
| Nominal wind speed |
12.5 m/s |
| Cut in wind speed |
3.5 m/s |
| Cut off wind speed |
None |
| Rotor diameter |
1.20 m |
| Number of blades |
3 |
| Blade material |
CFK |
| Rotor speed |
500 - 1300 rpm |
| Generator |
Permanent magnet |
| Norminal voltage |
12 VDC / 24 VDC |
| Speed regulation |
Rotor blade pitch |
| Power regulation |
Rotor blade pitch |
| Brake |
Generator short-circuit |
| Weight |
11.5 kg |
| Rotor thrust (operation) |
70 N |
| Rotor thrust (extreme wind speed) |
220 N |