Powered by the Sun

• Reverse polarity protected on battery wires.
• Easy to read LED indicators clearly display the controller's status.
• High efficiency charging circuitry. Insertion Loss resistance of only 0.080 Ohms on 12A Model, 0.008 Ohms on the 30A model.
• Field select for 12V or 24V operation. Shipped ready for 12V systems, simply cut a wire jumper for 24V
• Order with Load ON at Dusk, OFF at Dawn operation, or Load always ON.
• Low battery voltage Load Disconnect (LVD) and automatic LVD reset at dawn (A SES Flexcharge Patented feature).
• Manual Load Test / LVD Reset magnetically operated switch located under the load status indicator. Easily reset the LVD circuit after installation and test the controller's load circuitry.
• Delayed Low Battery Disconnect to prevent disconnect during momentarily high load currents.
• Delayed Dawn sensing circuit to prevent load switching during momentarily bright light levels (i.e. Lightning flashes, vehicle lights).
• Small enclosure 3"H x 3"W x 1.5"D + mounting feet.

Options

• Temperature Compensation.
• High current models (NC30L12, NC12L30, & NC30L30) 30 ampere charge and/or load capacities.
• Integral Digital Load Timer. Use with Dusk to Dawn Model. Starts timer at dusk then turns the load OFF after the selected time has elapsed. Set Run times up to 7.5 hour in 1/2; hour increments or 15 hours in or 1 hour increments, includes Dawn Override.
• Integral Load Flasher circuitry. Order flash repeat times from 0.25 sec to 10 sec with ON-Times from 0.1 sec to 5 sec.
• Voltage sense wires allowing the controller to be installed anywhere between the PV panels and the batteries.